014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Dubbelwerkende pneumatische oliepompen Those are suitable for central

Those are suitable for central supply of plants where a major quantity of grease and a major pressure at long and short distance are required

These pumps are advised for the transfer of low viscosity oil (SAE 15/80)

Outlet F10X1

filling of central distribution plants

014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Dubbelwerkende pneumatische oliepompen Those are suitable for centralIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.