TLS Quad Coupler 1.5 Finish:Black This bearing is installed on

This bearing is installed on the end of the First Pinion and fits all Prostar Hoists

The device also has a large attachment hole to facilitate carabiner rotation

The Mega-Claw will fit onto (1-1/2" Pipe) 1

- ANSI Z359

TLS Quad Coupler 1.5 Finish:Black This bearing is installed onThe Quad Coupler 1. 5 will clamp from 1. 25 OD to 1. 5 OD tubing, as well as 1" pipe (1. 315" OD.) The Quad Coupler 1. 5 is 1. 25" thick. The notch on the outside of clamp is 1. 26" across the flats and will fit over 1 1 4" square tube, while locking the clamp parallel with the 1 1 4" square tubing. Use the flat face to bolt to a fixture, or to allow the Quad Coupler 1. 5 to rotate when fastened to square tubing. The distance from the bottom of the