014-1061-030 - Follower plate for pumps with shank 30 mm subgroup-Dubbelwerkende pneumatische oliepompen The operating pressure may vary

The operating pressure may vary between a minimum of 3 bar and a maximum of 8 bar

In order to optimize the efficiency and the life of our air operated pumps

De opbrengst is variabel omdat dit afhangt van de hoeveelheid lucht welke wordt gebruikt

De vetpomp heeft een ratio van 60:1

014-1061-030 - Follower plate for pumps with shank 30 mm subgroup-Dubbelwerkende pneumatische oliepompen The operating pressure may varyIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.