CMT 191.507.11B Solid Carbide Upcut Spiral Flush Trim Bit 2"x1/2"x4-1/2" S=1/2" RH Wood Construction Connectors it features a negative hook

it features a negative hook angle and Triple Chip Grind tooth geometry to prevent material grabbing and ensure smooth

Is the ECC44 suitable for use in high-wind or seismic zones

Install With: 16d common nails or 16d x 2 1/2" joist hanger nails (sold separately)

Cutting Angle (a) 0 degrees

CMT 191.507.11B Solid Carbide Upcut Spiral Flush Trim Bit 2"x1/2"x4-1/2" S=1/2" RH Wood Construction Connectors it features a negative hookThe CMT 191. 507. 11B is a Upcut Spiral Router Bit with Bearing Guide. Upcut spiral bits eject chips upward for efficient chip evacuation in deep slots and pockets. Best finish on the lower face of the cut. SPECIFICATIONS Diameter (D) 1 2" Cutting Height (I) 2" Total Length (L) 4 1 2" Shank (S) 1 2" Number of Teeth 2 Product Type Upcut Spiral Router Bit with Bearing Guide Shank 1 2" Blade Material Solid Carbide Rotation Right hand (RH) Country of